Knives priority list – please only buy from this page if you have received an email from me confirming you’re on the priority list.

EU customers please be aware that due to changes in import/export rules you may be required to make additional payment for customs charges and VAT on reciept. I have not had any reports of this happening but it might, so I thought it best to warn you, just in case.

Showing all 2 results

  • Sold
    Mini sloyd finishing knife

    Small sloyd finishing knife – 60mm

    By accepting the terms and conditions you are confirming that you are over 18 years old and will supply photo id on request.

    EU customers please be aware that due to changes in import/export rules you may be required to make additional payment for customs charges and VAT on reciept. I have not had any reports of this happening as yet but it might, so I thought it best to warn you. Thank you.

    A small sloyd blade intended for finishing cuts, shaped and sharpened by myself using the Hewn and Hone small knife jig. It is available with an elm handle and bark/wood strip sheath or as bare blade for you to handle yourself. The tang is 1/4 inch round bar perfectly fits into a 6.5mm hole and is secured with epoxy resin glue.

     

    Made from bearing steel, forged and heat treated by Nic Westermann. I use a Sorby ProEdge to refine the shape, establish the bevels and hone to a scary sharp edge. The bevels are symmetrical and flat with an edge angle is 25 degrees. The blade is 60mm long, they are hand forged so there’s a little variation. The blade has a distal taper, it is thinner towards the tip. This makes the bevel narrower at the tip to permit a tight concave surface to be carved without chatter. These are intended to be used for finishing cuts, kept super sharp and nick free so you can get a perfect knife finish on your work.

    Please note the tip is very fine and not to be used for prying or drilling as it will likely bend or break.

    Some of the images on this page show the finishing knife along side a Mora 106, this for you to get a clear idea of the comparative size of the blades and bevels.

    £5.00 – £69.00
    Select options
  • Sold
    Micro sloyd knife blade

    Micro sloyd knife – 40mm

    By accepting the terms and conditions you are confirming that you are over 18 years old and will supply photo id on request.

    EU customers please be aware that due to changes in import/export rules you may be required to make additional payment for customs charges and VAT on receipt. I have not had any reports of this happening as yet but it might, so I thought it best to warn you. Thank you.

    A micro sloyd blade intended for finishing cuts and detailed carving, shaped and sharpened by myself using the Hewn and Hone small knife jig. It is available with an elm handle and bark/wood strip sheath or as bare blade for you to handle yourself. The tang is 1/4 inch round bar so fits perfectly into a 6.5mm hole and is secured with epoxy resin glue.

    Made from bearing steel, forged and heat treated by Nic Westermann. I use a Sorby ProEdge to refine the shape, establish the bevels and hone to a scary sharp edge. The bevels are symmetrical and flat with an edge angle of 30 degrees, which keeps the bevel narrow and the blade as stiff. This blade has a narrow bevels and is designed for carving delicate details and tight concave curves.

    The blade is about 40mm long and though it has a sharp point it is recommended you do not use this to drill or pry, just for cutting in line with the blade.

    Note that one of the images shows it in comparison to the 60mm finishing blade, so you can see the difference.

    £34.00 – £64.00
    Select options